PtRh5

  • General Designation: PtRh5
  • Applications: semi-finished products, glass manufacturing, glass fibre bushings, drain bushings
  • Product Forms: wire, sheet, tube
  • Density (g/cm³): 20.7

Density - HT

Details

Material Behaviour
ductile
Forming Process
formable, machinable

IACS Min. (%) [100% IACS ≙ 58 S*m/mm²]
10.24
IACS Max. (%) [100% IACS ≙ 58 S*m/mm²]
10.89
Electric Resistivity - HT¹
Thermo-emf. vs. copper Hard (mV)
-0.213
Temperature coefficient of electric resistivity
From Temperature (°C)
To Temperature (°C)
Hard (x10-4/K)
Annealed (x10-4/K)
0 100 19 20
Sources Electrical
¹measured

Young's Modulus (GPa)
190
Modulus of Rigidity (GPa)
65
Yield Strength RP0,2 - HT²
Ult. Tensile Strength Rm - HT³
Tensile Fracture Elongation A - HT⁴
Norton⁵
Creep Rupture⁶
Property Range
Hardness (HV)
Tensile Strength (MPa)
Yield Strength (MPa)
Elongation (%)
70 - 130 230 - 530 114 - 450 > 20
Sources Mechanical
²measured | ³measured | ⁴measured | ⁵measured and extrapolated | ⁶measured and extrapolated

Melting Range
From Temperature (°C)
To Temperature (°C)
1810 1820
Thermal conductivity - HT¹
Specific Heat - HT²
Sources Thermal
¹measured | ²measurerd

Disclaimer

The information in this data sheet contains only general information on the use of our products or examples for their application. They do not release the customer from a careful inspection of the delivered product for its fitness for the customer's particular purpose of use. Any customer's special requests regarding the particular use of a product will only be authoritative if Heraeus has confirmed to the customer in writing at the time of conclusion of a corresponding contract that the product delivered is fit for the customer's intended use. Heraeus, therefore, does not guarantee the correctness and completeness of the information regarding the customer's intended use. The customer's purchase will be governed exclusively by the written order confirmation of Heraeus and the Heraeus General Terms of Sale and Delivery, which are available at www.heraeus.com/gtc. This data sheet may be subject to changes at any time.

Discuss your solution

Get in contact with experts to discuss further steps to find the optimal solution for your process.