For surface curing, Heraeus uses special high-performance UVC lamp modules. The UVC module emits monochromatic, extremely intensive, short-wave UV radiation at a wavelength of exclusively 254 nm. The result is homogeneous curing at the surface of the material.
The patented QRC® reflector integrated in the module makes an additional contribution to the high efficiency of the module.
Despite the high UV intensity, the surface of the material is almost not heated and energy consumption remains low.
UVC high-performance modules for intensive short-wave UV radiation

Your advantages
- Homogeneous curing at the surface of the material
- Material does not heat
- Easy control through control panel
- Continuous UV dimming down to 70%
- Easy maintenance
- Environmentally-friendly method because ozone-free and energy resources are used sustainably
Product properties
- Variable control: A 0–10 V control signal sets a UVC output of 70% to 100%.
- Quick start: With the quick start of the UVC module, the UVC intensity is reached within 100 seconds
- Lamps can be installed in various positions, e.g. in a circle around a cooling roller or in a linear process
- The design of the lamp cassette enables fast and easy maintenance. All electrical connections and the cooling air connection are located at the rear of the UVC cassette
- Up to three cassettes can be operated with one control unit
Technical data | |
---|---|
Wavelength [nm] | 254 nm |
Irradiance [W/cm²] | 140 mW/cm² |
Emission window [mm] | 64 x 280 mm (2 lamps) |
Rated power [W] | 1.7 kW |
Cassette size (W x H x L) [mm] | 125 x 190 x 644 mm |
Input voltage | 200-400 V, 50/60 Hz, 1-phase or 346-415 V, 50/60 Hz, 3-phase |
Rated current | 3.4 A |