30201067 - 半組み立て済み素子

PCBタイプ (プリント基板実装) の白金測温抵抗体は, 特に熱量測定用途に適しています. 高精度, 長期安定性, コスト削減に加え, 完全自動工程化など熱量計に必要とされる厳しい要求事項を満たす仕様となっています. プリント基板にSMD-FCタイプの白金測温抵抗体が実装されています. 放熱を抑え, 測定誤差を防ぐためSMD素子は薄い誘電パスで端子と接続されています. ケーブル付きセンサとして, -40 °C~+150 °Cの温度範囲で幅広いアプリケーションにご使用いただけます.

30201067

テクニカルデータ

  • タイプ: PCB2240
  • 公称抵抗値 R₀ [Ω]: Pt1000
  • 温度係数 (TCR): 3850
  • 公差クラス: F 0.3 (B)
  • 最低温度 °C: -40
  • 最高温度 °C: 150
  • 最低温度公差 °C: -40
  • 最高温度公差 °C: 150
  • サイズ mm (L₁xWxH₁xL₂xH₂): 24 / 0.9 / 4 / 22 / 0.35
  • 最小嵌合径 (mm): 4
  • 最小嵌合径 (inch): 0.15
  • 接合技術: ソフトはんだ
  • 自己発熱: 氷水中 0.15 K/mW
  • 梱包: プラスチック ボックス
  • 保管期間: 推奨条件下で保管した場合, 製造後最低12か月. お客様の再認定による実際の保管条件によっては, 保管期間が長くなる可能性があります.
    窒素雰囲気推奨

お問い合わせ

詳細情報、見積り、製品選択等質問がございましたら、お気軽にお問合せください。

©oatawa - stock.adobe.com

The information provided in this data sheet describes certain technical characteristics of the product, but shall not be qualified or construed as quality guarantee (Beschaffenheitsgarantie) in the meaning of sections 443 and 444 German Civil Code. The information provided in this data sheet regarding measurement values (including, but not limited to, response time, long-term stability, vibration and shock resistance, insulation resistance and self-heating) are average values that have been obtained under laboratory conditions in tests of large numbers of the product. Product results or measurements achieved by customer or any other person in any production, test, or other environment may vary depending on the specific conditions of use. The customer is solely responsible to determine whether the product is suited for the customer's intended use; in this respect YAGEO Nexensos cannot assume any liability. The sale of any products by YAGEO Nexensos is exclusively subject to the General Terms of Sale and Delivery of YAGEO Nexensos in their current version at the time of purchase, which is available under www.yageo-nexensos.com/tc or may be furnished upon request. This data sheet is subject to changes without prior notice.