Press Release Overview

2018/03/05 | Technology & Innovation

A global first: Heraeus black.infrared increases efficiency of heating processes for semiconductor

Semicon China: A new infrared emitter design optimizes homogeneous heating processes under ultrapure vacuum conditions, with applications in photovoltaics and glass coatings

2018/02/13 | Technology & Innovation

Modern gas-catalytic infrared emitters are twice as fast in curing corrosion protective coating on casings

Mobile welding equipment is used in many different environments. Consequently, their casings are protected against corrosion by a base coating and then finished with a decorative top coating. However, the complete curing of both coatings involves considerable cost – and until now considerable time. A gas catalytic oven from Heraeus is now significantly helping to allow the anti-corrosion coating on the mild steel casings of the welders to be dried in half the previous time

2017/11/20 | Technology & Innovation

New UV LED system Semray® revolutionizes industrial curing processes

The new UV LED solution Semray® sets new standards in production flexibility and efficiency with it Plug & Play concept and powerful technologies.

The NOx electrodeless discharge lamp offers high accuracy in measurement of several gas components simultaneously and in real-time. The new module is flexible and effective in use with very low operating costs

2017/10/04 | Technology & Innovation

Emissions analysis for the highest demands

The increasing sense of environmental awareness around the globe is demanding higher standards for environmental monitoring. Heraeus Noblelight has developed an easy to use, plug & play light solution based on NOx light technology, for very accurate measurement of NOx and other pollution gases.

Precisely matched infrared systems from Heraeus Noblelight are helping to provide significant improvements in the production of the interior fitting of motor vehicles.

2017/08/02 | Technology & Innovation

Innovative Infrared Emitters Optimize the Manufacture of Vehicle Interior Fittings Using Vacuum Lamination

The use of Heraeus infrared emitters to assist the vacuum laminating technology at equipment and technology suppliers, 3CON, of Ebbs, Austria, is reducing cycle times by five seconds, liberating several square meters of valuable floor space and saving up to 30% in energy costs.

2017/06/28 | Technology & Innovation

Heraeus Noblelight opens most modern UV LED module production in Europe

New production facility surpasses industrial standards with cutting-edge production processes and clean-room technology.

2017/03/03 | Technology & Innovation

New, custom-built infrared system makes flat roofs more reliable with better sealing

By means of a simple retrofit with a Heraeus infrared system, a British manufacturer of roofing systems has made its production process more reliable and has achieved a significant improvement in product quality.

Infrared systems save energy and time in the manufacture of the inside trim of cars.

2016/08/31 | Technology & Innovation

New Infrared Systems Speed Up Car Production and Make Them More Efficient

Fast Homogenous Heating Saves Time and Valuable Space

Tempering with the MAX Infrared Oven saves time and space

2016/06/30 | Technology & Innovation

New MAX Infrared Oven is Five Times Faster For Glass Tempering

The new MAX infrared oven carries out processes of packaging glass for medications or tablets in a very homogenous IR radiation field within minutes in contrast to conventional heating processes.

Gas catalytic infrared oven for powder coating

2016/06/13 | Technology & Innovation

New, versatile infrared oven ensures brilliant surface finish for kitchen fronts

Gas catalytic infrared oven are custom-built for powder coating of medium density fibre board.

2016/04/05 | Technology & Innovation

Heraeus innovations accelerate the development of rollable and foldable displays and touchscreens

LOPEC Trade Fair: Heraeus exhibits research projects and new material and system solutions for printed electronics

2016/03/18 | Technology & Innovation

"Complexity made simple" - the new UV LED System meets five requirements at the same time

Heraeus Noblelight revolutionizes the UV LED market with Semray®. The UV LED plug&play solution for innovative and efficient curing processes celebrates its premiere at Drupa 2016, international trade fair for the printing industry.

2016/03/14 | Technology & Innovation

Coatings dried 50% more efficiently with new gas catalytic infrared emitter from Heraeus

Heraeus offers coating drying with electrical infrared emitters and, now also, gas catalytic infrared systems, which have been shown to provide up to 50% energy savings in user trials.

2016/03/14 | Technology & Innovation

Innovative Infrared System Dries and Sinters Printed Electronics Almost 2000 Times Faster than Previously

The continuous printing of electronics for displays or solar cells, depends on a rapid drying of the surface and good conductivity of the silver inks. A newly developed infrared module from Heraeus Noblelight achieves this in significantly less than one second.

Membrane laminating with infrared heat technology

2015/11/03 | Technology & Innovation

Better control of plastic lamination in less space with Heraeus infrared

Weatherfast Ltd of Great Barr achieves better control over the PVC Membrane laminating, while requiring much less space than the convection oven which was used previously.

2015/10/21 | Technology & Innovation

Decomposing greases and smells with efficient UV technology

Special UV light defies kitchen fumes.

Contoured infrared emitter for heating the edges of car mats and carpets

2015/07/31 | Technology & Innovation

Efficient infrared heat saves time and energy in the manufacture of motor vehicle carpets

Infrared heat helps to crimp the edges of motor vehicle carpets in the production process without any pre-heating.

2015/06/02 | Technology & Innovation

High light output stability for precise analysis – for a safer environment

“All together it is about climate protection” is the national motto of the “World Environment Day 2015”, which the UN calls on June 5th, every year to stimulate the worldwide awareness of the environment.

2015/05/19 | Technology & Innovation

Infrared emitters enable new manufacturing processes

Infrared heat for sandwich structures.

Heraeus MAX infrared oven in continuous operation

2015/05/19 | Technology & Innovation

Extremely efficient heating of metals with the MAX infrared oven

The heating process of metals requiring high temperatures gets extremely efficient due to exact process matching with the Heraeus Max infrared oven.

2015/04/27 | Technology & Innovation

Heraeus Noblelight gains Queen’s Award for enterprise in the innovation category

Automated manufacturing process for Flash Lamps improves productivity and consistency, while extending Lamp Life.

2015/03/26 | Technology & Innovation

Infrared emitters save energy in powder coating of alloy wheels

Heraeus Noblelight offers gas catalytic and electric infrared systems and will be showing infrared emitters and systems at the Hanover Show.

2015/03/26 | Business and Social

Heraeus Noblelight Relocates Arc & Flashlamp Laboratory to Cambridge

Heraeus Noblelight has moved its applications laboratory from the Technical University of Kaiserlautern, in Germany, to Cambridge.

2015/03/10 | Technology & Innovation

Intensive UV light means not a chance for germs

The new Premium UV modules are now even more powerful and safer - with acquisition costs of less than one cent per disinfected yoghurt cup.

2015/03/09 | Technology & Innovation

Combined use of UV technology and infrared heat makes paint curing even more energy-efficient

At the European Coatings Show in Nuremberg in April, Heraeus Noblelight will present application-optimised UV lamps, UV-LED systems and infrared heating solutions for efficient ink curing.

2015/03/06 | Technology & Innovation

Infrared emitters and UV lamps speed up production and improve quality

Heraeus Noblelight infrared and UV systems increase production speed and improve the quality of the drying process.

2015/03/04 | Technology & Innovation

New Generation: Short Carbon Infrared Emitters For Industrial Heating Processes

Carbon infrared emitters from Heraeus Noblelight combine the effective medium wave infrared radiation with high surface power output and short response times.

Press Releases