テクニカルデータシート

テクニカルデータシートダウンロード

下記よりご希望のデータシート・資料をお選びください。すべて英語ですが予めご了承ください。

ご希望の情報が見つからなかった場合 ご遠慮なく  こちら からお問い合わせください。

ハイブリッドエレクトロニクス

製品 概要 合金
 C 8728
Ag conductor, general purpose, solderable Ag
 C 8729 Ag conductor, plating applications (Cu, Ni) Ag
 C 8830 Ag conductor, firing at 430 - 800 °C on glass or ceramic, large area printing Ag
 C 8708 Ag via fill paste Ag
 C 4729 AgPt conductor 99:1 AgPt
 C 4741 AgPt conductor 54:1 AgPt
 C 2129 A Ag/Pd conductor 30:1 AgPd
 C 2180 Ag/Pd conductor 8:1, optimized for cost and performance AgPd
 C 2160B Ag/Pd conductor 6:1, general purpose, power hybrids, industrial, automotive AgPd
 C 2140 Ag/Pd conductor 4:1, general purpose, power hybrids, industrial, automotive AgPd
 C 2130B Ag/Pd conductor 3:1, general purpose, power hybrids, industrial, automotive AgPd
 C 2330 Ag/Pd conductor 3:1, hybrids on AlN substrates AgPd
 C 2360 Ag/Pd conductor 6:1, hybrids on AlN substrates AgPd
 C 4300UF Au unfritted for multilayer applications as top conductor Au
 C 4350 Au low melting temperature Au
 C 5020 Au conductor, unfritted, Pb free, on top of Au based layer Au
 C 5729 Au conductor Au
 C 5809 Au conductor, mixed bonded Au
 C 5810 Au conductor, mixed bonded, fine line printing Au
 C 5819 Au conductor, mixed bonded, fine line printing, Al wire bondable Au
 C 5909A Au conductor, hole plug, stencil or bladder fill Au
 C 5909P Au conductor, hole plug, screen printable Au
 C 8640 Ag/Cu eutectic conductor, air fired AgCu
 C 4082 Pb and Cd free Ag/Pd/Pt conductor for high leach resistance applications. AgPdPt
 CL 11-5871 Pt conductor, unfritted, screen print or brushable Pt
 IP 2109 Acid resist overglaze green for steel and resistor Dielectric%2FOverglaze
 IP 9036A Acid resistant (plating solution) overglaze that fires at ~610 °C, optimum laser trim, green and black versions available Dielectric%2FOverglaze
 IP 9038A Pb and Cd free 500 °C firing resistor overglaze, green, white, and black versions available Dielectric%2FOverglaze
 IP 9217 Lead free multilayer dielectric paste, blue Dielectric%2FOverglaze
 IP 9227 Lead free 2-layer dielectric paste for multilayer application Dielectric%2FOverglaze
 PD 5110 Silicone overcoat, available in blue, black, and white Overcoat
 PD 5220 Epoxy overcoat, available in blue, black, and white Overcoat
 R 400AR Series Low ohmic value resistor series, 50 mΩ/sq - 10 Ω/sq, REACH compliant Resistor
 R 8900 Series Standard, stable resistor series, 1 Ω/sq - 1M Ω/sq, REACH compliant Resistor
 9000 Series Standard, stable resistor series, 100 Ω/sq - 20G Ω/sq Resistor
 9300 Series Low TCR, stable resistor series, 100 Ω/sq - 100M Ω/sq Resistor
 PCR 12000AR Series Low firing temperature resistor series, 2 Ω/sq - 40 Ω/sq (<600 °C) Resistor

製品 概要 合金
 C 2103M Ag/Pd conductor for fuel level sender applications, Pb and Cd free AgPd%3Cbr%2F%3E
 C 2210 Ag/Pd conductor 0.8:1 (Pb-free) for fuel level sensor AgPd%3Cbr%2F%3E
 C 2220 Ag/Pd conductor 2.1:1 (Pb-free) for fuel level sensor and general purpose AgPd
 C 2230 AgPd conductor 3:1 (Pb-free) for fuel level sensor and general purpose %3Cbr%2F%3EAgPd
 C 2240 Ag/Pd conductor 4:1 (Pb-free) for fuel level sensor and general purpose AgPd
 C 6011 AuPdPt conductor for fuel level sensor and general purpose, non-solderable AuPdPt
 C 6012 AuPdPt conductor for fuel level sensor, solderable AuPdPt
 C 6212 Au/Pd/Pt conductor for fuel level sensor, solderable, Pb free version of C 6012 AuPdPt
 C 3605S Pt conductor, screen printable Pt
 C 3606 Pt conductor, high firing temperature 1500°C Pt
 C 3657 Pt conductor, sensor applications Pt
 LP11-4493 (OS1) Pt conductor, fritted Pt
 6082 Pt conductor, brushable, reactive bonded paste Pt
 A3788A Pt conductor, brushable, reactive bonded paste Pt
 A4338A Pt conductor, unfritted, brushable paste Pt
 6926 Pt conductor, unfritted, brushable paste Pt
 LPA88-11S Pt conductor, fritted, high operating temperature 1000°C Pt
 LPA709-112 Pt conductor, co- and post fireable on zirconia or alumina tape Pt
 SG-335 Sealing glass, Pb and Cd free, low TCE for AlN, Si3N4, Si Overglaze
 C3620 Pt conductor, fritted, for use on alumina and AlN Pt
 CL 11-5100 (OS2) Pt conductor, unfitted Pt
 CL 11-5349 (OS2) Pt conductor, unfitted Pt
 CL 11-6109 (OS3) Pt conductor, acid resistant Pt

製品 概要 合金
 C 8717 E Ag conductor for high fired film thickness Ag
 C 7403 / C 7404 A Cu conductors, Pb and Cd free two part thick print system, designed for AlN and Al2O3. Cu
 C 7403C / C 7404C Cu conductors, Pb and Cd free two part thick print system, designed for AlN and Al2O3. Cost sensitive. Cu
 C 7440 Cu conductor, Fine line, wire bondable Cu
 C 7462 Cu conductor, ENIG platable Cu
 C 7463LV Cu conductor, hole plug for Al2O3 Cu

製品 概要 合金
 C 8830 Ag conductor, firing at 430-800 °C on glass or ceramic, large area printing Ag
 C 4740S AgPt conductor, general purpose for alumina, BeO, multilayer application AgPt
 C 4774 AgPt conductor, high leach resistance on AlN AgPt
 C 2330 Ag/Pd conductor 3:1, hybrids on AlN substrates AgPd
 C 2360 Ag/Pd conductor 6:1, hybrids on AlN substrates AgPd
 C 4350 Au low melting temperature Au
 C 4774 AgPt conductor, high leach resistance on AlN AgPt
 C 5730 Au conductor, AlN applications, etchable Au
 C 7847 Cu conductor, compatible with Celcion system Cu
 C 8829D Ag conductor, Celcion system compatible, Al wire bondable Ag
 IP 6075 Dielectric paste for Aluminum substrates. Dielectric%20%2F%20Overglaze
 IP 6080A Dielectric paste for Al substrates, Celcion system Dielectric%20%2F%20Overglaze
 SM 2000 Solder mask, silicone, Celcion system Overcoat
 HTR 12000AR Series Low firing temperature resistor system, Pb free, compatible with Celcion, heaters on Al Resistor
 451BA Pt conductor, low firing temperature, solderable, glass substrates (600-650 °C) Pt
 IP 9241 Lead free dielectric for Al2O3 and AlN substrates (850-950 °C firing) Dielectric%20%2F%20Overglaze
 IP 9246 Lead free dielectric, nitrogen fireable for AlN substrates Dielectric%20%2F%20Overglaze
 SC 1000 Ag conductor, heater on steel application Ag
 SC 1001 AgPt conductor, heater on steel application AgPt
 SD 1010A Dielectric Paste for insulating Cr steel Dielectric%20%2F%20Overglaze
 SD 1019 Acid resistant overglaze Paste for protection of steel dielectric Dielectric%20%2F%20Overglaze

受動部品

製品 概要 合金
 C 2129A Ag/Pd conductor 30:1 AgPd
 C 2180 Ag/Pd conductor 8:1, optimized for cost and performance AgPd
 C 2160B Ag/Pd conductor 6:1, general purpose, power hybrids, industrial, automotive AgPd
 C 2240 Ag/Pd conductor 4:1 (Pb-free) for fuel level sensor and general purpose AgPd
 C 2230 AgPd conductor 3:1 (Pb-free) for fuel level sensor and general purpose AgPd
 PD 5110 Silicone insulator ink for circuit protection, blue, black, or white available Dielectric
 R 400AR Low ohmic resistors, 10 milliohms/sq to 10 ohms/sq, REACH compliant Resistor
 C 1076 SD AgPt conductor 99:1, low cost solderable AgPt
 PCC 11913 Ag conductor, screen printable, solderable, low firing temperature (<700°C) electrode on various ceramics, Pb and Cd free Ag
 DT 8785 Ag conductor, Pb and Cd free solderable end termination Ag
 PCC 11865/11866 Ag conductor, Pb free 2 part termination system for PTC thermistors Ag

製品 概要 合金
 ET 2001 Ag conductor, fast cure polymer silver end termination, Ni/Sn plateable for MLCC (NPO, X7R) Ag
 ET 2001-1 Ag conductor, fast cure polymer silver end termination, Ni/Sn plateable for MLCC (NPO, X7R) Ag
 ET 2002 Ag conductor, fast cure polymer silver end termination, cost sensitive, Ni/Sn plateable for MLCC (NPO, X7R) Ag
 ET 2003 Ag conductor, fast cure polymer silver end termination, cost sensitive, Ni/Sn plateable for MLCC (NPO, X7R) Ag
 ET 3200 Ultra low Ag plateable conductor for ET applications, Inductor, MLV, MLCC Ag
 ET 3201 Ultra low Ag plateable conductor for ET applications, Inductor, MLV, MLCC Ag
 ET 3202 Ag conductor, low silver content, plateable end termination for inductors, MLV, MLCC (NPO, X7R) - patent pending Ag
 ET 3203 Ag conductor, low silver content, plateable end termination for inductors, MLV, MLCC (NPO, X7R) - patent pending Ag
 ET 1847 Ag conductor, solderable Ag end termination, axial and radial lead attachment Ag
 ET 1893 Ag conductor, plateable low firing temperature (525-600°C) end termination Ag
 ET 1897 Ag conductor, plateable ET for small case sizes, NPO and X7R MLCCs Ag
 ET 1860 Ag conductor, Cu plateable ET for NPO and X7R MLCCs Ag
 ET 1850 Ag/Pd conductor for MLCC ET bodies NPO and X7R, Ni plateable AgPd
 ET 1856 Ag/Pd conductor 4:1, solderable and plateable end termatination for MLCC (NPO, X7R) AgPd
 ET 1857 Ag/Pt conductor for high temperature discoidals AgPt
 ET 1813 Ag/Pt conductor, higher leach resistance than ET1857 AgPt
 ET2010 Ag conductor, polymer thick film flexible end termination for many passive component types, Ni/Sn plateable Ag

製品 概要 合金
 ET 1890A

製品 概要 合金
 CL 80-8747R Ag conductor, Pb free termination for disc varistors Ag
 DT 8785 Ag conductor, Pb and Cd free solderable end termination Ag
 DT 8832 Ag conductor, disc termination for PTC Ag
 PCC 11865/11866 Ag conductor, Pb free 2 part termination system for PTC thermistors Ag
 10-074HF Ag conductor, screen printable disc component metallization Ag
 PCC 11889 Ag conductor, screen printable, solderable, low firing temperature (< 700 °C) electrode on various ceramics, Pb and Cd free Ag%3Cbr%2F%3E
 PCC 11914 Ag conductor, Pb and Cd free for oxide substrates, sprayable, dippable Ag
 PC 10904HV Ag conductor, sprayable/dippable metallization component metallization Ag
 ST 1677 Ag conductor, screen printable for piezoelectric transducers, NTC thermistors, alumina Ag%3Cbr%2F%3E%3Cbr%2F%3E
 ST 1433 Ag conductor, sprayable, solderable termination for PZTs Ag

プリンテッドエレクトロニクス

製品 概要 合金
 LTC 3601 Ag conductor, polymer thick film for flexographic print applications, high conductivity
 LTC 3602 Ag conductor, high conductivity, very low Ag polymer thick film
 LTC 3610 Ag conductor, low roughness, high conductivity polymer thick film
 LTC 3901 Ag conductor, halogen free polymer thick film
 LTR 4905 5 ohm Graphene ink
 LTR 4911 10 ohm Graphene ink
 LTR 4600 Series
 UVD 5801 UV cureable dielectric, blue
 UVD 5802 UV cureable spacer ink, clear, thick printing
 UVD 5803

製品 概要 合金
 LTC 3602 Ag conductor, high conductivity, very low Ag polymer thick film
 LTC 3610 Ag conductor, low roughness, high conductivity polymer thick film
 LTR 4905 5 ohm Graphene ink
 LTR 4911 10 ohm Graphene ink
 LTR 4600 Series

製品 概要 合金
 LTC 3602 Ag conductor, high conductivity, very low Ag polymer thick film
 LTC 3610 Ag conductor, low roughness, high conductivity polymer thick film
 LTR 4905 5 ohm Graphene ink
 LTR 4911 10 ohm Graphene ink
 LTR 4600 Series

製品 概要 合金
 LTC 3302 Ag conductor, polymer thick film for use on rigid substrates
 LTC 3501 Ag conductor, solderable polymer thick film, Pb free solder acceptance
 LTR 4300 Series Polymer resistor system for flexible substrate applications
 LTR 4300H Series Polymer resistor system for heater applications with high operating temperatures
 LTD 5101 Polymer thick film dielectric, screen printable, single component and fast cure, silicone
 LTD 5301 Polymer thick film dielectric, screen printable, single component and fast cure, polyimide
 PD 5110 Silicone insulator ink for circuit protection, blue, black, or white available
 PD 5220 Epoxy insulator ink for circuit protection, blue, black, or white available
 UVD 5271 UV cureable overglaze
 UVD 5370GR

貴金属パウダー

製品 概要 合金
 Ag 300-01 Ag powder Ag
 Ag 300-02 Ag powder Ag
 Au 200-03 Spherical Au powder Au
 Au 200-09 Flake Au powder Au
 Au 200-30 Nano-gold-suspension Au
 Pd 600-03 Pd powder Pd
 Pt 100-10 Pt powder Pt
 Ru 703-04 Ru Oxide powder Ru